Swipe the monitor left or right to display the touch function icons on the shooting screen, and touch (image
adjustment). You can set
(Brightness), (Color), and [ Creative Look] to your preferences. Touch each icon at
the bottom of the screen to set each item.
For details, refer to “ Adjusting images in the auto mode (My Image Style) .”
To select the recording format (
File Format)
The resolution and degree of compatibility vary depending on the recording format (XAVC S 4K/XAVC S HD). Select the
format in accordance with the purpose of the movie to be shot.
To select the frame rate or image quality (
Movie Settings)
The frame rate determines the smoothness of motion in movies. ([
Movie Settings] → [Rec Frame Rate])
The image quality changes with the bit rate. ([
Movie Settings] → [Record Setting])
If the bit rate is high, the amount of information will increase and you can shoot high-quality movies. However, this will
result in a larger volume of data.
Select the frame rate and bit rate according to your preference and purpose.
To adjust the exposure (
Shoot Mode)
You can select the exposure mode in [
Shoot Mode]. Select the exposure mode through the combination of a shutter
speed and aperture value.
Also, if you enable [Touch AE] under [Touch Func. in Shooting], you can adjust the exposure to the touched area.
To select the focusing method (
Focus Mode/ Focus Area)
Select
(Continuous AF) or (Manual Focus) for [ Focus Mode]. You can specify the focus area by setting
[
Focus Area].
Hint
You can also assign the start/stop movie recording function to a preferred key.
You can change the settings for ISO sensitivity, exposure compensation, and focus area while shooting movies.
The sounds of the camera and lens in operation may be recorded during movie shooting. To prevent sounds from being
recorded, set [Audio Recording] to [Off].
When [Auto Power OFF Temp.] is set to [High], the camera can continue movie recording even when the temperature of the
camera becomes high.
Note
An icon indicating that data is being written is displayed after shooting. Do not remove the memory card while the icon is
displayed.
You cannot start recording a movie while writing data. Wait until data writing is completed and “STBY” is displayed before
recording a movie.
If the
(Overheating warning) icon appears, the temperature of the camera has risen. Turn the power off and cool the camera
and wait until the camera is ready to shoot again.
The temperature of the camera tends to rise when shooting movies continuously, and you may feel that the camera is warm. This
is not a malfunction. Also, [Internal temp. high. Allow it to cool.] may appear. In such cases, turn the power off and cool the
camera and wait until the camera is ready to shoot again.
For the continuous shooting time of a movie recording, refer to “Recordable movie times.” When movie recording is finished, you
can record another movie by pressing the MOVIE button again. Recording may stop to protect the product, depending on the
temperature of the product or the battery.
Still images cannot be captured during movie recording.
To Next Page
Loading...
Need help?
General
