Help Guide
Digital Camera
ZV-1M2
File Settings
Configure settings for the file names of recorded movies.
Menu item details
File Number:
You can set how to assign file numbers to movies.
[Series]: Does not reset file numbers even if the memory card is changed.
[Reset]: Resets the file number when the memory card is changed.
Series Counter Reset:
Resets the series counter used when [File Number] is set to [Series].
File Name Format:
You can set the format for movie file names.
[Standard]: The file name of the recorded movie starts with “C.” Example: C0001
[Title]: The file name of the recorded movie becomes “Title+File number.”
[Date + Title]: The file name of the recorded movie becomes “Date+Title+File number.”
[Title + Date]: The file name of the recorded movie becomes “Title+Date+ File number.”
Title Name Settings:
You can set the title when [File Name Format] is set to [Title], [Date + Title], or [Title + Date].
Note
Only alphanumeric characters and symbols can be input for [Title Name Settings]. Up to 37 characters can be entered.
Titles specified using [Title Name Settings] are only applied to movies recorded after the setting is made.
You cannot set how folder names are assigned for movies.
If you are using an SDHC memory card, [File Name Format] is locked to [Standard].
If you insert a memory card used with [File Name Format] set to one of the following into another device, the memory card may
not function properly.
[Title]
[Date + Title]
[Title + Date]
If there are unused numbers due to file deletion, etc., these numbers will be reused when the movie file number reaches “9999.”
Related Topic
File/Folder Settings
5-049-603-11(1) Copyright 2023 Sony Corporation
MENU →
(Shooting) → [File] → [File Settings] → desired setting item.
1
To Next Page
Loading...
Need help?
General
