Features UM2411
6/61 UM2411 Rev 2
1 Features
• STM32H747XIH6 Arm
®(a)
Cortex
®
core-based microcontroller with 2 Mbytes of Flash
memory and 1 Mbyte of RAM in TFBGA240 + 25 package
• 4” capacitive touch LCD display module with MIPI DSI
SM
interface
(STM32H747I-DISCO order code only)
• Ethernet compliant with IEEE802.3-2002
• USB OTG HS
• SAI audio codec
• ST-MEMS digital microphone
• 2 x 512-Mbit Quad-SPI NOR Flash memory
• 256-Mbit SDRAM
• 4 color user LEDs
• 1 user and reset push-button
• 4-direction joystick with selection button
• Fanout daughterboard
• Board connectors:
– Camera (8-bit)
– USB with Micro-AB
– Ethernet RJ45
– SPDIF RCA input and output
– Stereo headset jack including analog microphone input
– Audio jack for external speakers
– microSD™ card
– TAG-Connect 10-pin footprint
–Arm
®
Cortex
®
10-pin 1.27 mm-pitch debug connector over STDC14 footprint
• Board expansion connectors:
– Arduino™ Uno V3
– Pmod™ supported by Type 2A and Type 4A
–STMod+
– Audio daughterboard
• Flexible power-supply options:
– ST-LINK USB V
BUS
, USB OTG HS connector,
or external sources
• On-board STLINK-V3E debugger/programmer with USB re-enumeration capability:
mass storage, Virtual COM port and debug port
• Comprehensive free software libraries and examples available with the STM32Cube
MCU Package
• Support of a wide choice of integrated development environments (IDEs), including
IAR
™
, Keil
®
and GCC-based IDEs
a. Arm is a registered trademark of Arm Limited (or its subsidiaries) in the US and/or elsewhere.
To Next Page
Loading...
Need help?
General
