UM2411 Rev 2 7/61
UM2411 Ordering information
60
2 Ordering information
To order the STM32H747I-DISCO or STM32H747I-DISC1 Discovery kit, refer to Table 1.
2.1 Product marking
Evaluation tools marked as “ES” or “E” are not yet qualified and are therefore not ready to
be used as reference design or in production. Any consequences arising from such usage
will not be at STMicroelectronics’ charge. In no event will STMicroelectronics be liable for
any customer usage of these engineering sample tools as reference designs or in
production.
‘E’ or ‘ES’ marking examples of location:
• on the targeted STM32 that is soldered on the board (for illustration of STM32 marking,
refer to the section Package information in the STM32 datasheet at www.st.com).
• next to the evaluation tool ordering part number, that is stuck or silkscreen printed on
the board
The boards feature a specific STM32 device version, which allows the operation of any
bundled commercial stack/library available. This STM32 device shows a "U" marking option
at the end of the standard part number and is not available for sales.
In order to use the same commercial stack in his application, a developer may need to
purchase a part number specific to this stack/library. The price of those part numbers
includes the stack/library royalties.
Table 1. Ordering information
Order code Board reference Target STM32 Differentiating feature
STM32H747I-DISCO
– MB1248
– MB1166
(1)
STM32H747XIH6U – With LCD module
STM32H747I-DISC1 – MB1248 STM32H747XIH6U – No LCD module
1. LCD extension board.
To Next Page
Loading...
Need help?
General
