WORKSHOP MANUAL
2 - INFORMATION FOR SERVICE CENTRES
EDITION
PAGE
9 /37
Use original spare parts only. Replacement of any machine component with anything other than
a part authorised by the Manufacturer can adversely affect performance, working life or safety of
this machine and will void the Warranty.
The manufacturer disclaims all liability for any claims or damages, albeit under warranty, property
damage, personal injury or death resulting from the use of unauthorised spare parts.
The original blades have design, material and processing characteristics optimised for use on
the equipment for which they were designed; these characteristics are not present in so-called
"compatible" spare parts.
The table emphasises the reasons why it is important to choose an original blade, useful when
making such decisions.
Requirement Remarks
No breakage of the blade
ends.
Using steel balls, the manufacturer simulates what can happen
when mowing over any foreign bodies on the lawn. This can ruin
the blade edge, but no component can come loose, fall off or be
hurled away.
No breakage of the
blades.
The impact test is the most severe durability test that any lawnmow-
er can be subjected to.
An iron tube is placed exactly inside the blades when the mower is
running.
The blade may deform but it will never, under any circumstances,
fall off or break.
This test verifies that blades and other components meet the high
safety requirements.
Excellent balance.
Minimum noise.
Minimum vibrations.
The blades and blade ends supplied by the authorised dealer all
have exactly the same weight.
The blades and blade ends supplied by the authorised dealer are
all perfectly balanced.
This guarantees minimum noise and vibrations, for maximum ma-
chine operating life.
This also ensures that the machine complies with the noise and
vibration regulations.
Excellent cutting result.
The blades and blade ends supplied by the authorised dealer are
optimised for the application for which they are intended.
In short, this means that the blades are suitable for the shape of the
casing and to the number of revolutions to provide the best possible
cutting result.
To Next Page
Loading...
Need help?
General
