Edition
2016
Workshop Manual
PARK 120 - PARK 220
Chapter
7 Electrical system
Page
64
PARK 220
Remove the engine casing; for further details see
2.1.1
Warning!
Empty the tank of any residual fuel.
A
A
1. Disconnect the (+) and (-) poles of the
battery.
2. Remove the tank together with its
support, 3 screws (A- Torx T30).
3. Remove the battery.
To reassemble the various parts, repeat the operations in reverse order.
7.5 Control panels
A1,A2
Switch A1
The switch can be used to smoothly set the
cutting height of the cutting deck with electric
cutting height adjustment.
Switch A2
Switch for engaging and disengaging the
operation of the front mounted implement.
Two positions:
1. Press the front part of the switch
– PTO engages. The symbol will light up.
2. Press the rear part of the switch
– PTO disengages.
To Next Page
Loading...
Need help?
General
