EN - 7
F. Grass catcher: in addition to collecting
for
models with rear collector only).
G. Discharge chute: this is the part
connecting the cutting device
for
models with rear collector only).
H. Driving seat:
the presence of the operator.
I. Steering wheel:
J. Front bumper: this protects the
K. Battery
4. ASSEMBLY
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or hazards.
Unpacking and completing the assembly
should be done on a flat and stable surface,
with enough space for machine handling
and its packaging, always making use of
suitable equipment. Do not use the machine
until all the indications provided in the
“ASSEMBLY” section have been carried out.
4.1 ASSEMBLY COMPONENTS
Description
1
2 Dashboard cover and steering
3 Driving seat
4
5 -
-
6 Grass catcher bag supports and asso-
(models with rear
collector only)
7 Side discharge chute (for models with
side discharge only)
8 -
9
(for models with side discharge only)
cables
- 1 spare 10 A fuse
10 models with side discharge
function only)
4.1.1 Unpacking
1.
2.
box, including these instructions.
3.
4.
–
–
5. Move the front drive release lever to
the released position (par. 5.4).
4.2 STEERING WHEEL ASSEMBLY
1.
2.
().
3. ) onto the
protruding shaft (), rotate it so that the
).
4.
() e (
3.G
5.
To Next Page
Loading...
Need help?
General
