EN - 11
5.6 THROTTLE COMMAND
A. Type “I” with separate Choke
command (Fig. 15.B + Fig. 15.C)
B. Type “II” (Fig. 15.B)
1. Choke Command - Cold start.
enriches the
2. Maximum engine speed. To
during grass cutting operations.
3. Minimum engine speed. Used
NOTE When moving from one area
to another, place the lever in a position
between "tortoise" and "hare".
NOTE Some models are equipped
with a system that automatically controls
the choke position in the carburettor
during engine ignition and heating.
5.7 PARKING BRAKE LEVER
1. Brake not engaged. To release
3.A, 14.A). The lever returns
2. Brake engaged. To engage the
g. 13.A,
14
5.8 HEADLIGHTS SWITCH
This button () is used to
(
5.9 CUTTING DEVICE ENGAGE AND
DISENGAGE FUNCTIONS
This control is used to engage and
1. Cutting device engaged.
out
or button
pressed
.
2. Cutting device disengaged.
pressed
or button
released
.
When the cutting device are
disengaged, a brake is applied
simultaneously in order to stop them
rotating within a few seconds.
NOTE The “Cutting device disengaged”
condition is indicated by the lamp (g. 16.A).
NOTE If you engage the cutting device
without taking the necessary safety
precautions, the engine shuts down and
cannot be restarted (see par. 6.2.2)
To Next Page
Loading...
Need help?
General
