EN - 29
14. PROBLEM IDENTIFICATION
PROBLEM PROBABLE CAUSE REMEDY
1.
the dashboard fails to
is no acoustic signal
replace fuse (10 A) (par. 8.5).
2.
position, the dashboard
but the acoustic
signal is activated
3.
dashboard is
does not run
replace fuse (25 A) (par. 8.5)
4.
engine does not start
and have the correct gap
5.
6.
during cutting
relation to cutting height
raise the cutting height (par. 6.5.4)
7. The engine stops
device are engaged
engage not enabled
8.
has been running
9. The oil indicator light
top-up the oil level (see 7.3.1)
To Next Page
Loading...
Need help?
General
