EN - 19
6.5.3 Reverse gear
IMPORTANT Reverse must be engaged
when the machine has stopped.
1. Press the pedal (par. 5.1) until the
2.
6.5.4 Grass cutting
1.
2.
3.
4.
5. Regulate the speed and cutting height
6.
IMPORTANT To proceed in reverse gear
with the cutting device engaged, it is necessary
to press and hold the consent button (par.
5.10) so as not to cause the engine to stop.
–
– When driving on grass free surfaces
–
6.5.5 Suggestions for maintaining
a nice lawn
•
•
• If the cutting device are positioned too
•
should be cut a little higher to prevent
•
the grass being ripped out of the ground.
•
•
to ensure a sharp cut of the grass and
cuttings through the discharge chute.
•
•
6.5.6 Emptying the grass catcher (for
rear collection models only)
NOTE The emptying of the grass catcher
can only be done with the cutting device
disengaged, otherwise the engine stops.
•
•
1. disengage the cutting device (par.
2.
3.
4.
To Next Page
Loading...
Need help?
General
