EN - 16
• Acoustic signals - Buzzer
1. Continuous
• Electronic card protection
• The engine has been
2.
• The grass catcher is full.
6. USING THE MACHINE
The safety regulations to follow
are described in chap. 2. Strictly
comply with these instructions to
avoid serious risks or hazards.
6.1 PREPARATION
1.
2. select the appropriate operating
6.1.1 Filling with oil and fuel
IMPORTANT The machine is
supplied without engine oil or fuel.
the oil level (par. 7.2, par. 7.3). For refuelling
6.1.2 Seat adjustment
To adjust it, lift the handle (), slide
6.1.3 Tyre pressure
condition for ensuring that the cutting device
1.
2.
3. Adjust the pressure according to the values
6.1.4 Preparing the machine
before starting work
NOTE This machine can be used to
mow lawns in a number of dierent ways;
before starting work, prepare the machine
based on how the lawn is to be mowed.
a. Preparation for grass cutting and
collection in the grass catcher (for
rear collection models only)
–
–
of the grass catcher opening is
–
regulate the retaining spring (see 8.9).
b. Preparation for mowing and rear
grass discharge (models with rear
–
in the instructions provided.
c. Preparation for mowing and
mulching of grass
–
it and leaving it on the grass
15.1). This has to be attached to the rear
plate as indicated in the instructions.
In the case of models with
side discharge, make sure that the
lateral discharge support has been
mounted (fig. 22.A) (if fitted).
d. Prepare the machine for cutting
and lateral grass discharge (for
models with side discharge only):
–
To Next Page
Loading...
Need help?
General
