EN - 22
• Type “I”
1.
2. Place a suitable container under
3.
4. Collect the oil in a suitable vessel.
5.
6.
7.
• Type “II”
1.
2. Place a suitable container under
3.
using a pair of pliers, loosen the
4. Bend the extension tube and
drain the oil into the container.
5.
and reattach the extension tube
6.
IMPORTANT Hand the spent
oil over to a disposal facility in
accordance with local provisions.
7.4
AND CUTTING device DISENGAGED.
1.
2.
in the desired position
3.
7.5 BATTERY
•
•
•
must be recharged as soon as possible.
IMPORTANT Recharging must be
done using a battery charger at constant
voltage. Other recharging systems can
irreversibly damage the battery.
•
the corresponding connector for the special
IMPORTANT This connector must
only be used for connection to the
maintenance battery charger indicated
by the Manufacturer. For its use:
– follow the instructions given in the
relative instruction manual;
– follow the instructions in the battery manual;
7.6 CLEANING
7.6.1 Cleaning the machine
•
electrical parts or the electronic circuit
board located under the dashboard.
•
and petrol storage area free of grass,
leaves, or excessive grease.
To Next Page
Loading...
Need help?
General
