FS 300, FS 350, FS 380
English
82
Replacing Cutting Blades
STIHL PolyCut
Always check the mowing head for signs
of wear before installing new cutting
blades.
WARNING
If there are signs of serious wear,
replace the complete mowing head.
The thermoplastic cutting blades are
referred to as "blades" in the following.
The mowing head is supplied with
illustrated instructions for replacing the
blades. Keep the instructions for the
mowing head in a safe place.
WARNING
To reduce the risk of injury, always shut
off the engine before installing the
blades.
N Remove the mowing head.
N Replace blades as shown in the
illustrated instructions.
N Mount the mowing head on the
machine.
Changing the Fuel Pickup Body
Change the fuel pickup body every year:
N Drain the fuel tank.
N Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
N Push the new pickup body into the
hose.
N Place the pickup body in the tank.
Maintenance work
STIHL recommends that all
maintenance and repairs be carried out
by STIHL servicing dealers
Anti vibration elements
Four antivibration elements (arrows) for
damping vibrations are installed
between the engine and the drive tube.
Have them checked in the event of
noticeable, constantly increased
vibration.
Inspection and Maintenance
by User
To Next Page
Loading...
Need help?
General
