EasyManuals Logo
Home>Stihl>Floor Machine>RE 80

Stihl RE 80 User Manual

Stihl RE 80
Go to English
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #48 background imageLoading...
Page #48 background image
0458-001-9621-A
46
English
4 Safety Precautions
Never use a damaged connecting cable, extension cord
or mains plug.
If the high-pressure washer is dirty or wet: clean the
high-pressure washer and allow it to dry.
If the spray attachment is dirty: Clean the spray
attachment.
Do not modify the high-pressure washer.
If the controls do not work: Do not operate the high-
pressure washer.
►Fit original STIHL accessories for this high-pressure
washer.
Attach accessories as described in this User Manual or
in the User Manual for the accessories.
Do not insert objects into the openings in the high-
pressure washer.
Replace worn or damaged labels.
If you have any doubts, be sure to consult a STIHL
dealer.
4.7 Working
WARNING
In certain situations, the user may no longer be able to
concentrate on their work. This may result in the user
stumbling, falling and suffering serious injury.
Keep calm and plan your work.
In poor light conditions and poor visibility: Do not
operate the high-pressure washer.
Use the high-pressure washer on your own.
Watch out for obstacles.
Work standing on the ground and keep your balance. If
you have to work at a height: Use a mobile elevating
work platform or secure scaffolding.
If you start feeling fatigue: Take a break.
If the high-pressure washer starts behaving differently or
in an unusual way while operating, the high-pressure
washer may be in an unsafe condition. This may result in
serious injury to people and damage to property.
Stop working, unplug the mains plug from the socket
and consult a STIHL dealer.
The high-pressure washer must always be operated in
an upright position.
To ensure an adequate exchange of cooling air, do not
cover the high-pressure washer.
When the spray gun trigger is released, the high-pressure
pump switches off automatically and water stops flowing
out of the nozzle. The high-pressure washer is then in
stand-by mode and is still switched on. If the spray gun
trigger is squeezed, the high-pressure pump switches on
again automatically and water flows out of the nozzle. This
may result in serious injury to people and damage to
property.
When not operating the machine: Lock the spray gun
trigger.
Unplug the mains plug of the high-pressure washer from
the socket.
Switch off the high-pressure washer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl RE 80 and is the answer not in the manual?

Stihl RE 80 Specifications

General IconGeneral
BrandStihl
ModelRE 80
CategoryFloor Machine
LanguageEnglish

Related product manuals