EasyManuals Logo
Home>Stihl>Floor Machine>RE 80

Stihl RE 80 User Manual

Stihl RE 80
Go to English
188 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #64 background imageLoading...
Page #64 background image
0458-001-9621-A
62
English
13 Transporting
Remove the high-pressure hose and let the rest of the
water run out of the high-pressure hose.
Remove and clean the nozzle and spray lance.
Remove the spray gun and let the rest of the water run out
of the spray gun.
Clean the high-pressure washer.
Roll up the high-pressure hose (1) and hang it on the
holder (2).
Coil the connecting cable (3) on the holder (2).
Secure the connecting cable (3) using the clip (6).
Insert spraying set (5).
Insert the nozzles (7).
Store the spray attachment in the holders (4) on the high-
pressure washer.
12.2 Protecting the pressure washer with antifreeze
If the pressure washer cannot be protected from frost during
transport or storage, the pressure washer should be
protected by a glycol-based antifreeze. The antifreeze
prevents water inside the pressure washer from freezing and
causing damage to the pressure washer.
Remove spray lance
Connect the shortest possible water hose to the pressure
washer.
The shorter the water hose, the less antifreeze is needed.
Mix the antifreeze as described in the antifreeze
Instruction Manual.
Pour antifreeze into a clean container.
Insert water hose into container of antifreeze.
Squeeze and hold spray gun trigger.
Switch on pressure washer.
Hold down spray gun trigger until an even jet of antifreeze
is delivered from the spray gun and point the spray gun
into the container.
Press and release spray gun trigger several times.
Switch off pressure washer and unplug mains plug from
the socket.
Detach spray gun, high-pressure hose and water hose
and allow antifreeze to run into the container.
Store and dispose of antifreeze in accordance with the
applicable regulations and in an environmentally
responsible manner.
13.1 Transporting the high-pressure washer
Switch off the high-pressure washer and pull the mains
plug out of the socket.
Empty or secure the detergent container so that it cannot
topple over, fall down and cannot move.
7
5
4
3
2
1
6
00000097257_001
13 Transporting

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Stihl RE 80 and is the answer not in the manual?

Stihl RE 80 Specifications

General IconGeneral
BrandStihl
ModelRE 80
CategoryFloor Machine
LanguageEnglish

Related product manuals