0478 131 8365 C - EN
42
The name of the robotic mower
(Ö 10.) and the text "iMOW® ready
for op." are displayed in the bottom
area of the screen together with the
symbol shown, the automatic mowing
status (Ö 15.4) and information on GPS
protection (Ö 5.9).
Status information during running
activities:
The text "iMOW® mowing lawn" and
a corresponding symbol are shown
on the display during a running
mowing operation. The text and symbol
are adapted to the respective active
operation.
The text "Attention – iMOW® starting" and
a warning symbol are displayed before
the mowing operation.
Edge mowing:
While the robotic mower mows the
edges of the mowing area, the text
"Mowing edge" is displayed.
Drive to docking station:
When the robotic mower returns to
the docking station, the relevant
reason is indicated in the display
(e.g. Battery discharged, Mowing
completed).
Battery charging:
The text "Charging battery" appears
during charging of the battery.
Approach starting points:
When the robotic mower
approaches a starting point when a
mowing operation starts, the text
"Approaching starting point" is displayed.
Travel to desired zone:
When the robotic mower
approaches a desired zone when a
mowing operation starts, the text "Travel to
desired zone" is displayed.
Message screen:
Errors, faults or recommendations are
displayed together with warning symbol,
date, time and message code. If several
messages are active, they appear
alternately. (Ö 23.)
11.3 Information area
The following information is shown in the
top right corner of the display:
1. Charge state of the battery or charging
in progress
2. Automatic mowing status
3. Time
4. Mobile radio signal
1. Charge state:
The battery symbol serves to
indicate the charge state.
No bars – battery discharged
1 to 5 bars – battery partially
discharged
6 bars – battery fully charged
During charging, the mains plug
symbol is shown instead of the
battery symbol.
2. Automatic mowing status:
When automatic mowing is switched
on, the Automatic symbol appears.
Flashing of the display illumination
and a signal tone additionally
indicate the impending start of the
mowing motor. The mowing blade
is only activated a few seconds
after the robotic mower has been
set into motion.
The message and status
information appear alternately if the
robotic mower is ready for
operation.
To Next Page
Loading...
Need help?
General
