0478 131 8365 C - EN
64
● Ending mowing operation:
When the battery is discharged, the
robotic mower automatically travels
back to the docking station. (Ö 15.6)
A running mowing operation can be
ended manually at any time using the
STOP button or the "Drive home"
menu. (Ö 5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (Ö 13.1)
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (Ö 10.)
15.5 Mowing independently of active
times
● Activate the docked robotic mower by
pressing a button. This also switches on
the docking station.
Mowing areas with docking station:
● Immediate mowing:
Call up the Start mowing command
(Ö 11.5).
The mowing operation starts
immediately and continues until the
selected time. A starting point can be
selected, if available.
● Start mowing using the app. (Ö 10.)
The mowing operation starts at the
selected start time and continues until
the selected end time. A starting point
can be selected, if available.
● Ending mowing manually:
A running mowing operation can be
ended at any time using the STOP
button or the "Drive home" menu
(Ö 11.6). (Ö 5.1)
Activating Homecall on the docking
station also ends the running mowing
operation immediately. (Ö 13.1)
The mowing operation can also be
ended using the app – send the robotic
mower to the docking station. (Ö 10.)
Secondary areas:
● Activate the robotic mower upright in
the docking station. This also activates
the docking station.
● Carry the robotic mower to the
secondary area.
● Activate the secondary area. (Ö 12.10)
● Immediate mowing:
Call up the Start mowing command
(Ö 11.5).
The mowing operation starts
immediately and continues until the
selected time.
● Ending mowing:
When the selected end time is reached,
the robotic mower travels to the
perimeter wire and comes to a
standstill. Return the machine to the
docking station to recharge the battery
and confirm the displayed message.
(Ö 23.)
A running mowing operation can be
ended manually at any time using the
STOP button. (Ö 5.1)
15.6 Docking the robotic mower
Docking during automatic operation:
The robotic mower automatically travels to
the docking station when the active time
ends or when the battery is discharged.
Forcing docking:
● If necessary, switch on the
docking station (Ö 13.1)
● Activate drive home. (Ö 11.6)
During a mowing operation,
Homecall can also be activated
on the docking station.
● The robotic mower can also be sent to
the docking station using the app.
(Ö 10.)
Manual docking:
● Push the robotic mower into the
docking station by hand.
Mowing areas that the robotic
mower reaches via a corridor are
only mown if starting points have
been defined in the relevant area.
If necessary, the robotic mower
charges the battery in the interim
and then continues the mowing
operation until the selected end
time.
If the battery runs flat before the
selected end time, the mowing
operation is shortened accordingly.
After docking, no further mowing
operation takes place in the current
active time.
To Next Page
Loading...
Need help?
General
