Sungrow SG2500U-MV User Manual

System Manual 12 Routine Maintenance
93
Check the protective paint on the MV Station surface for peeling off. Please
re-paint the MV Station surface if necessary.
Re-spray the protective paint once every 3-5 years to the MV Station surface.
12.4 Replacement of the electrical components
The electrical components inside the MV Station must be replaced by the same
components from the same manufacturer and of the same model.
The model can be found on the marking of the MV Station or the component itself.
If otherwise, please contact Sungrow.
If the components needs to be replaced with products from other manufacturers
or of different model on site, a prior analysis and confirmation by Sungrow is
required.
Failure to follow this procedure may lead to physical injury or death and void all
warranty from Sungrow.

Sungrow SG2500U-MV Specifications

General

Brand	Sungrow
Model	SG2500U-MV
Category	Inverter
Language	English