Suzuki DF200 Service Manual

ABBREVIATIONS
Abbreviations used in this service manual are as follows:
BTDC : Before Top Dead Center
CKP : Crankshaft position
CMP : Camshaft position
CTP : Close Throttle position
DC : Direct Current
DOHC : Double Over Head Camshaft
ECM : Engine Control Module
EX (Ex.) : Exhaust
IAC : Idle Air Control
IAT : Intake Air Temperature
IN (In.) : Intake
MAP : Manifold absolute pressure
OCV : Oil control valve
PCV : Positive Crankcase Ventilation
PORT : Port
PTT : Power Trim & Tilt
SPS : Shift Position Sensor
STBD : Starboard
TPS : Throttle Position Sensor
VSV : Vacuum switching valve
VVT : Variable Valve Timing
5

Suzuki DF200 Specifications

General

Bore x Stroke	97 mm x 97 mm
Maximum Output	200 HP
Fuel Delivery System	Multi-Point Sequential Electronic Fuel Injection
Starting System	Electric
Gear Ratio	2.29:1
Number of Cylinders	4
Maximum Output (kW)	147 kW
Steering	Remote
Max Power	200 HP
Trim Method	Power Trim and Tilt
Exhaust	Through Prop Hub Exhaust
Displacement	2, 867 cc
Weight	226 kg
Full Throttle Operating Range	5, 500 - 6, 100 rpm
Oil Capacity	8.0 L
Full Throttle RPM Range	5500 - 6100 RPM
Shaft Length	20 inches, 25 inches
Alternator Output	44 A
Engine Type	4-Stroke DOHC 16-Valve