Sym LV30W2-EU User Manual

16
○B Dimmer Switch
High and low beam can be selected with this switch. When the headlight is on high beam , the high
beam indicator comes on (page 7).
High beam
Low beam
○C Hazard Switch
Push the switch to position with the ignition switch in “On” position. All the turn signal lights and turn
signal indicators will blink.
○D Turn Signal Switch
When the turn signal switch is turned to the left or right , the corresponding turn signals blink on
and off. To stop blinking, push the switch in.
○E Horn Button
When the horn button is pushed when the ignition switch is turned on; the horn sounds.
○F TCS Button (if equipped)
Push and hold the TCS button to turn on or off the traction control system when the ignition switch is
turned on.
Windscreen
This scooter is equipped with a 2-position adjustable windscreen. Adjust the positions to fit your figure.
High position: ○A
Low position: ○B
 Remove the 2 screws ○C to remove the 2 windscreen garnishes ○D .
 Remove the 4 flange bolts ○E ; select a position that you prefer and mount the windscreen.
 Install the 2 garnishes.
○A
○B
○C
○D
○E
○A
○B

Sym LV30W2-EU Specifications

General

Brand	Sym
Model	LV30W2-EU
Category	Scooter
Language	English