33
10. Taking Care of Your Scooter
Washing
Fully cool down the engine, muffler, brakes and other high-temperature parts before washing. We suggest
you to cover the muffler’s exhaust vent and shut the ignition switch slot.
Rinse your scooter with cold water from a water hose to remove dirt.
Mix a neutral detergent that is designed for scooters or automobiles and water in a bucket. Use a
sponge to wash your scooter.
After washing, rinse your scooter thoroughly with clean water to remove the residue.
Use an air gun to blow off the water and use a clean soft cloth to dry your scooter.
Carefully ride your scooter at a slow speed and apply the brakes several times to help drying the
brakes.
NOTE :
Do not rinse the radiator with high water pressure.
Specially take care of the matt color plastic parts if they are equipped. Never wax matt color parts.
To Next Page
Loading...
Need help?
General
