1
HYDRAULIC SYSTEM
Overview
The hydraulic system in the Synesso™ is comprised of all parts through which water flows starting
with where it enters the machine from the water treatment/filtration system. This chapter will detail the
flow of water and some of the associated electrical components.
Synesso™ utilizes 3/8” braided stainless hoses (supplied with machine) to connect to the water treat-
ment system. Once the machine is set up and the water quality is checked, the machine is ready to
connect to the water treatment system. The water then passes to the pump and motor.
On single inlet machines, the water then travels through one hose to the machine and supplies both
the coffee boiler system and the steam boiler.
On dual inlet machines, the water diverts at the pump: the water for the coffee boiler goes through the
pump and the water for the steam boiler travels through a separate line. The next 3 pages show the
dual, single, and Hydra inlet water paths.
To Next Page
Loading...
Need help?
General
