6
TOOLS AND SUPPLIES
Tools and recommended Items required to fully
diagnose, service and maintain Synesso™ machines
•
Multi Meter – reads volts, amps and ohms.
(The Fluke T5-600 is recommended)
•
Heat Shrink Gun or Torch
•
Vacuum with a Hose
•
Compressed Air
•
Descaler – Citric Acid
•
Flashlight
•
Box Knife
•
Thread Sealant – Red and Blue Loctite
•
Food Grade Grease
•
Tube Bender
•
Flare Tool - 45°
•
Tube Cutter
•
Brass Bristle Brush
•
Socket Wrench with 1/2” and 9/16” sockets
•
Hammer
•
Wire Stripper / Crimper
•
Small Punch and Chisel
•
Small Files – Round and Triangular
•
Small Picks – Straight and Curved (great for
replacing portafilter gaskets)
•
Die and Tap, 1/8” NPT and 1/4” NPT
•
Tap for Threads, 10 - 32 and 3/8 – 16
•
Set of Allen Wrenches – 3/32” (brass flow jet),
9/64” (brew valves), 1/4” (steam valve seat)
•
Wrenches: 2x11/32, 1/4, 5/16, 3/8, 2x7/16,
1/2, 2x9/16 , 5/8, 11/16, 3/4, 12mm & 17mm
•
Large, Medium and Small Adjustable Wrench-
es (Crescent Wrenches)
•
Pliers: Channel Lock, Standard and Side Cut-
ters
•
Philips Head Screwdrivers: #2 short, #2 long
and #1
•
Flat Head Screwdrivers: #2 short, #2 medium,
#1 medium, #0 medium
•
A large flat head screwdriver (or nail puller) to
use as a pry bar or wedge.
•
Pen and paper
•
Hand cleaner
•
Towels
To Next Page
Loading...
Need help?
General
