12
| Installation
9.2.2 Divide the air handling unit
Divide Topvex SR60-80 and Topvex SR60-80 for transport through smaller openings (min 900 mm)
Disconnect the quick connection cables and the 4 connectors (torx 6 mm) and divide the air handling unit.
Fig. 14
9.3 Installation of roof (only Topvex SR ODK versions)
Two roof parts including sheet metal screws for outdoor installation are enclosed at delivery.
• Observe the angle on the two roof parts.
• Place first the right roof part on top of the air handling unit and then the left roof part.
• Fasten with the enclosed sheet metal screws.
Fig. 15
254050 | A001
To Next Page
Loading...
Need help?
General
