8
Indicators and Display Functions
●
Indicates that your radio has received a Selcall call. If the indicator is flash-
ing, your radio received a call which you were unable to answer. Your radio
may be programmed to display your caller's identity.
●
Indicates that your radio is ready for you to select a status code relating to
your current activity. You may use the Up and Down (
/ ) scroll
keys to choose a status code or description from a list.
●
Indicates that your radio is ready for you to enter information to enable it to
select a new channel. You may use the Up and Down (
/ ) scroll
keys to choose from a list, the Alphanumeric (
) key to enter a label,
or the number keys. If the indicator is flashing, the current channel is in
Repeater Talkaround mode.
●
Indicates that you can enter information, such as a channel label, from the
keypad, using letters or numbers.
●
If this indicator is on continuously, the signalling mute (if active) is open. This
may be because either the microphone is off-hook, or you have pressed the
Monitor (
) key. If the indicator is continually flashing, the Monitor key
has been pressed for long enough to open the RF squelch.
Note:
When the radio is operating normally, this indicator is off.
●
Indicates the state of the auxiliary options switch. Depending upon the pro-
grammed configuration of the auxiliary options switch, this indicator may be
either on continuously or off continuously, or may only come on while the
Auxiliary (
) key is pressed down.
●
Indicates that you can change the user programmable options. The display
window shows the option last viewed. You may use the Up and Down (
/
) scroll keys to move through the options, then select one with the
Enter (
) key.
●
Indicates you have pressed the Enter ( ) key.
When these indicators are all off, the radio is in DTMF mode. It can now
transmit DTMF tones, entered via the keypad.
STAT
Ch
Fn
CALL, STATUS, CHAN-
NEL, ALPHANUMERIC &
FUNCTION indicators all
off
To Next Page
Loading...
Need help?
General
