9
Display Window
The LCD display window provides you with direct visual access to information and messages about the
status of your calls and your radio.
Display Window Indicators
BUSY
Busy
- This appears whenever there is activity on you current channel. If the
signalling mute on your radio is closed (see the
function), you may
not hear the traffic until you lift your microphone off-hook.
TX
Transmit
- Your radio is transmitting. This message is displayed when you
press the PTT key. It should also come on briefly when your radio makes a
Selcall or DTMF call.
SCAN
Scan
- Your radio is sampling each of a group of channels for any activity.
When it detects activity, it pauses on that channel for as long as the channel
carries traffic and then resume scanning.
WAIT
Wait
- The channel you are using is busy and your call has been deferred.
The radio gives you an alerting signal to indicate that the channel is now
free.
Scrolling available
- You are now able to use the Up and Down ( /
) scroll keys to move through a list of choices. Having found an ap-
propriate choice with the keys, push the Enter (
) key to select.
STAT
Ch
Fn
α
TX
SCANBUSY
T2000
II
WAIT
To Next Page
Loading...
Need help?
General
