17
STAT
Ch
Fn
α
T2000
II
7
PQRS
3
DEF
TX
Press key Characters displayed Explanation
Current channel
Last number called
1st digit of the new number
2nd digit of the new number
Group wild card character
Call placed to all 37??? users
Example:
You wish to call a group of users on the current channel (REGION2) with numbers which all
begin with 37, and have three more digits. After you have selected channel REGION 2, the sequence of
keystrokes, and the corresponding display characters that appear, is as follows:
When the group call has been sent, there is no acknowledging tone from any of the other users. Wait a
few seconds after the TX indicator in the display window disappears and then broadcast your message.
Phrase your message in such a way that it requires no acknowledgement, since the other users cannot
all reply at once.
Receiving a Selcall Call
When you receive a Selcall call, the CALL indicator flashes and a ringing tone (similar to that of a
telephone) sounds from the speaker.
Note:
Your T2020
II
may be programmed to display the call-
er’s identity when you receive a call. Consult your Tait
dealer for more information on this feature.
●
To answer the call, lift the microphone off-hook and identify
yourself. As soon as you operate the PTT key, the ringing
tone stops.
●
If you do not answer the call within a short time, the ringing tone
stops. The radio may then switch on another alerting device
(e.g. the horn in your car) to attract your attention.
To Next Page
Loading...
Need help?
General
