Taylor C717 Operator's Manual

7-2
OPERATOR’S CHECKLIST
Models C709 & C717
Operator’s Checklist
7
Winter Storage
If the place of business is to be closed during the winter
months, it is important to protect the freezer by following
certain precautions, particularly if the building is subject
to freezing conditions.
Disconnect the freezer from the main power source to
prevent possible electrical damage.
On water-cooled freezers, disconnect the water supply.
Relieve pressure on the spring in the water valve. Use air
pressure on the outlet side to blow out any water
remaining in the condenser. This is extremely
important. Failure to follow this procedure may cause
severe and costly damage to the refrigeration system.
Your local Taylor distributor can perform this winter
storage service for you.
Wrap detachable parts of the freezer (such as the beater,
blades, driveshaft, and freezer door) and place them in a
protected dry place. Rubber trim parts and gaskets can
be protected by wrapping them with moisture-proof
paper. All parts should be thoroughly cleaned of dried mix
or lubrication, which can attract mice and other vermin.
It is recommended that a Taylor service technician
perform winter storage draining, to ensure all water has
been removed. This guards against freezing and
rupturing of the components.

Taylor C717 Specifications

General

Brand	Taylor
Model	C717
Category	Freezer
Language	English