TC-Helicon VoiceLive Touch2 User Manual

7
Effects, Voices and basic editing
Note that Harmony requires a musical reference from either:
a) guitar chords from a guitar connected to the Guitar In,
b) music from an MP3 player
c) chords from a MIDI keyboard connected to the MIDI in or
d) the key of your song (see Using Harmony below).
Tip: You can access additional settings for each voice by holding the
respective Voice buttons.
editinG a preset
• Find a preset you like.
• Tap the Edit button once. This will present an edit menu for one of
the nine effects (e.g. “Reverb 3/9”).
• Tap the Matrix buttons to select a setting that you want to change
(e.g. “Style”). The selected setting will be highlighted.
• Swipe the Slider FX Bar to change the value of the selected setting.
• Tap the arrow buttons to browse edit menus for the other effects.
• Tap the Edit button again to enter an effect’s advanced menu with
additional settings. To return to basic editing mode, tap the Edit
button once more.
• Make changes and either store the edited preset by pressing the
Store button or discard your changes by pressing Home.
Tip: To jump directly to the edit menu of a specific effect, tap the Effects
button and hold the Matrix button assigned to that effect.
effects and Voices
Tap the Effects and Voices buttons to display menus where you can
modify the current preset. The parameters of each menu are assigned
to the positions of the nine Matrix buttons. These assignments are
shown in the display. You can always press the Home button to return
to preset selection/main operation mode.
the effects button
• Load a preset you like or load preset #1.
• Tap the Effects button to display the effect modules and their states
(light background = effect active; dark background = effect off).
• Sing as you tap any of the Matrix buttons to turn the other available
effects on and off.
• Sing as you slide your finger along the Slider FX Bar.
the Voices button
• First, tap the Effects button and ensure that only the HARM Matrix
button is lit.
• Tap the Voices button.
• Sing as you tap on any of the Matrix buttons to hear up to 4 Har-
mony voices that are set to different intervals.
• Slide your finger along the Slider FX Bar to change the volume of
the Harmony voices.

TC-Helicon VoiceLive Touch2 Specifications

Analog Inputs

mic input impedance	3.08/1.54 kOhm
mic input level at 0 dBFS	-42 dBu to +4.2 dBu
mic equivalent input noise at max mic gain Rg = 150 Ohm	-127 dBu
mic signal-to-noise ratio	>100 dB
guitar input impedance	1 MOhm
guitar input level at 0 dBFS	-7 dBU to 17 dBu
guitar input signal-to-noise ratio	>108 dB
aux input level at 0 dBFS	+2 dBu
analog to digital conversion	24 Bit, 128 x oversampling bitstream, 110 dB SNR A-weighted

Analog Outputs

output impedance balanced/unbalanced	80/40 Ohm
output range line	+2 dBu
dynamic range	>109 dB, 20 Hz to 20 kHz
frequency response	+0/-0.3 dB, 20 Hz to 20 kHz
headphone out	+17 dBu max (50 mW max)
digital to analog conversion	24 Bit, 128 x oversampling bitstream, 115 dB SNR A-weighted

Power

external power supply	100 to 240 VAC, 50 to 60 Hz (auto-select)
power consumption	<14 W

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity max	90 % non-condensing

Size and Weight

dimensions	9” x 4” x 7” (230 x 100 x 180)
weight	5 lb. (2.3 kg)