TC-Helicon VoiceLive Touch2 User Manual

Caution
You are cautioned that any change or modifications not expressly ap-
proved in this manual could void your warranty.
eMc/eMi
This equipment has been tested and found to comply with the limits for
a Class B Digital device, pursuant to part 15 of the FCC rules.
These limits are designed to provide reasonable protection against
harmful interference in residential installations. This equipment gener-
ates, uses and can radiate radio frequency energy and – if not installed
and used in accordance with the instructions – may cause harmful inter-
ference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception – which
can be determined by turning the equipment off and on –, the user is
encouraged to try correcting the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from the
one to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
For the customers in Canada:
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-
003 du Canada.
Important Safety Instructions
iMportant safety instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings.
8. Install in accordance with the manufacturer’s instructions.
9. Do not install near heat sources such as radiators, heat registers,
stoves, or other apparatus (including amplifiers) that produce heat.
10. Only use attachments/accessories specified by the manufacturer.
11. Refer all servicing to qualified service personnel. Servicing is required
when the apparatus has been damaged in any way, such as power-
supply cord or plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been exposed to
rain or moisture, does not operate normally, or has been dropped.
Warning!
• To reduce the risk of fire or electrical shock, do not expose this
equipment to dripping or splashing and ensure that no objects filled
with liquids, such as vases, are placed on the equipment.
• Do not install in a confined space.
Service
• All service must be performed by qualified personnel.

TC-Helicon VoiceLive Touch2 Specifications

Analog Inputs

mic input impedance	3.08/1.54 kOhm
mic input level at 0 dBFS	-42 dBu to +4.2 dBu
mic equivalent input noise at max mic gain Rg = 150 Ohm	-127 dBu
mic signal-to-noise ratio	>100 dB
guitar input impedance	1 MOhm
guitar input level at 0 dBFS	-7 dBU to 17 dBu
guitar input signal-to-noise ratio	>108 dB
aux input level at 0 dBFS	+2 dBu
analog to digital conversion	24 Bit, 128 x oversampling bitstream, 110 dB SNR A-weighted

Analog Outputs

output impedance balanced/unbalanced	80/40 Ohm
output range line	+2 dBu
dynamic range	>109 dB, 20 Hz to 20 kHz
frequency response	+0/-0.3 dB, 20 Hz to 20 kHz
headphone out	+17 dBu max (50 mW max)
digital to analog conversion	24 Bit, 128 x oversampling bitstream, 115 dB SNR A-weighted

Power

external power supply	100 to 240 VAC, 50 to 60 Hz (auto-select)
power consumption	<14 W

Operating Environment

operating temperature	32° F to 122° F (0° C to 50° C)
storage temperature	-22° F to 167° F (-30° C to 70° C)
humidity max	90 % non-condensing

Size and Weight

dimensions	9” x 4” x 7” (230 x 100 x 180)
weight	5 lb. (2.3 kg)