Preparation
Connecting 2nd Bluetooth® device
1 In the power-off state, press and hold [ Í/l] for at least 7 seconds until the LED
indicator lights alternately in blue and red.
• Wait about 5 seconds after you turn off the power of the unit.
• The LED indicator lights (Red/blue) to indicate that the unit is in pairing mode.
2 Perform steps 2 and 3 of “Pairing procedure - When pairing your headphones first time
with a Bluetooth® device”. ( i 13)
• When the LED indicator (blue) blinks twice every approx. 2 seconds, pairing (registration) is completed.
(Connection established)
Note
•You can pair a maximum of 10 Bluetooth® devices with this unit. W hen you pair a device after the maximum has been
exceeded, previous devices are overwritten. To use overwritten devices again, do the pairing again.
• It is easier to pair if you disable the Bluetooth® function of the first device when pairing with a device after the first.
• If the connection with the device does not complete within 5 minutes, the pairing mode on this unit cancels and they
transition to connection standby mode. Perform pairing again.
• This unit rem embers the device lastly connected. The unit may connect automatically after turning on the power of
this unit.
14
www.panatex.com.ua
To Next Page
Loading...
Need help?
General
Weight and Dimensions
