Saving Waveforms and Setups
Pwr
Dwn
-
The instrument will automatically save the software-controlled
settings when the instrument is turned off. The instrument will return to these
same settings when the instrument is turned back on.
Setupl
-
The instrument will use the setup saved under
Setupl
at power
UP.
Setup2
-The instrument will use the setup saved under
Setup2
at power
UP.
Step
4:
The selection is now saved. Press the
ADV
FUNCT
button to
return to normal operation.
In Detail
4
C
To Next Page
Loading...
Need help?
General
