Tektronix 2232 User Manual

Front Panel
COUPLING (Channel 2)
AC
- Capacitively couples the signal input. Blocks DC to 10 Hz signals.
GND (Ground) - Decouples the signal input and connects the vertical
system to ground reference.
DC - Passes all signal components to the vertical and acquisition systems.
lnput Connection (Channel 2)
Provides the Channel 2 signal input connection for probes or coaxial cables.
GND Connection
The "Banana" jack receptacle provides a connection to the instrument
ground.
lnput Connection (Channel 1)
Provides the Channel 1 signal input connection for probes or coaxial cables.
COUPLING (Channel 1)
AC
- Capacitively couples the signal input. Blocks DC to 10 Hz signals.
GND (Ground) - Decouples the signal input and connects the vertical
system to ground reference.
DC - Passes all signal components to the vertical and acquisition systems.
VOLTS/DIV (Channel 1)
(Volts per division) - Selects the vertical scale factor for Channel 1. Also
vertically expands or compresses Channel
1 saved waveforms.
CAL (Channel 1)
(Calibrated) - The clockwise position provides calibrated volts/division
settings. Rotating the control counterclockwise variably increases the attenu-
ation of the settings, thereby reducing signal amplitude. (Variable settings
are not calibrated.)
CH 1 BOTH CH 2
Selects either a single-channel display or a two-channel display:
CH 1 - Displays Channel 1 only.
BOTH -Activates the ADD ALT CHOP switch for two-channel displays.
CH 2 - Displays Channel 2 only.
PRB ADJ
(Probe Adjust) - Provides a 0.5 V square wave signal to compensate XI 0
probes.
-
r
2232 User Manual 2-13
L.

Tektronix 2232 Specifications

General

Brand	Tektronix
Model	2232
Category	Test Equipment
Language	English