Tektronix DPO2000 Series Programmer's Manual

Commands Listed in Alphabetical Order
Returns
A value between
0 and 1, which represents the fractional portion of the source
record.
MATH[1]:SPECTral:GATing:INDICators:STARt? (Query Only)
Returns the starting point in the source waveform record used for computing the
FFT math waveform.
Group
Math
Syntax
MATH[1]:SPECTral:GATing:I NDICators:STARt?
Returns
A value between 0 and 1, which represents the fractional portion of the source
record.
MATH[1]:SPECTral:MAG
Sets or returns the units of the Spectral Magnification function in the math string.
Group
Math
Syntax
MATH[1]:SPECTral:MAG {LINEAr|DB}
MATH[1]:SPECTral:MAG?
Arguments
LINEAR sets the SpectralMag units to linear.
DB sets the SpectralMag units to decibels.
Examples
MATH1:SPECTRAL:MAG DB sets the SpectralMag units for Math1 to decibels.
MATH1:SPECTRAL:MAG? might return :M A
TH1:SPECTRAL:MAG DB
indicating
that the SpectralMag units for Math1 are set to decibels.
MATH[1]:SPECTral:NYQUISTFreq? (Query Only)
Returns the Nyquist frequency of the FFT math waveforms.
Group
Math
2-182 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English