Tektronix DPO2000 Series Programmer's Manual

Command Groups
Search Comman
dGroup
Use the commands in the Search Commands Group to seek out information in
waveform records.
Search Comm
ands
Command Description
SEARCH?
Returns all
search-related settings
SEARCH:SEARCH<x>:COPy Copies the search criteria to the trigger, or
the trigger criteria to the search.
SEARCH:SEARCH<x>:STATE Sets the search state to on or off
SEARCH:SEARCH<x>:TOTAL? Returns the total number of matches for
search <
x>
SEARCH:
SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:CONDition
Sets or r
eturns the search condition for C AN
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:DIRection
Sets or returns the CAN search condition to
be valid on a READ, WRITE or either
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:
CAN:DATa:QUALifier
Sets or returns the C AN data qualifier
SEAR
CH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:SIZe
Sets
or returns the length of the data string
in bytes to be used for CAN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN:DATa:VALue
Sets or returns the binary data string to be
used for CAN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x
>:CAN:FRAMEtype
Sets or returns the CAN Frame Type to be
use
d
SE
ARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN{:IDentifier|:ADDRess}:MODe
Se
ts or returns the CAN addressing mode to
standard or extended format
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:CAN{:IDentifier|:ADDRess}:VALue
Sets or returns the binary address string to
be used for CAN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:CONDition
Sets or returns the search condition for a LIN
search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:HIVALue
Sets or returns the binary data s tring
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:QUALifier
Sets or returns the L IN data qualifier
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:SIZe
Sets or returns the length of the data string
in bytes
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:DATa:VALue
Sets or returns the binary data string used
for a LIN search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:ERRTYPE
Sets or returns the error type used for a LIN
Search
SEARCH:SEARCH<x>:TRIGger:A:BUS:
B<x>:LIN:IDentifier:VALue
Sets or returns the binary address string
used for LIN search
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-33

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English