Tektronix DPO2000 Series Programmer's Manual

Command Groups
Table 2-31: Trigger Commands (cont.)
Command
Description
TRIGger:A:VIDeo:POLarity Sets or returns the polarity of
the A video trigger
TRIGger:A:VIDeo:SO Urce Sets or returns the polarity of
the video trigger
TRIGger:A:VIDeo:STANdard Sets or returns the video
standard
TRIGger:A:VIDeo{:SYNC |:FIELD} Sets or returns the video
field trigger
TRIGger:EXTernal?
Returns external trigger
parameters
TRIGger:EXTernal:PRObe Sets or returns the
attenuation factor value of
the external probe connector
TRIGger:EXTernal:YUNIts?
Returns the external trigger
vertical (Y) units value
TRIGger:STATE? Returns the current state of
the triggering system
Vertical Command Group
Use the commands in the Vertical Command Group to control the vertical setup of
all live (channel) waveforms for acquisition and to display of channel, reference,
and math waveforms.
Ta
ble 2-32: Vertical Commands
Command Description
AUXin?
R
eturns auxiliary input parameters
AUXin:PRObe Returns all information concerning the probe
attached to auxiliary input
AUXin:PRObe:AUTOZero Sets the TekVPI probe attached to the
auxiliary input to autozero
AUXin:PRObe:COMMAND Sets the state of the specified probe control
AUXin:PRObe:DEGAUss Starts a degauss/autozero c ycle on a TekVPI
current probe attached to the auxiliary input
AUXin:PRObe:DEGAUss:STATE? Returns the degauss state of the TekVPI
current probe attached to the auxiliary input
AUXin:PRObe:FORCEDRange Sets or returns the range of the TekVPI probe
attached to the auxiliary input
AUXin:PRObe:GAIN Sets or returns the gain factor of the probe
that is attached to the auxiliary input
MSO2000B, DPO2000B, MSO2000 and DPO2000 Series Oscilloscopes Programmer Manual 2-47

Tektronix DPO2000 Series Specifications

General

Brand	Tektronix
Model	DPO2000 Series
Category	Test Equipment
Language	English