Commands Listed in Alphabetical Order
Examples
WFMOUTPRE:YZE
RO?
might return :WFMOUTPRE:YZERO -100.0000E-3
indicating that vertical offset is set to –100 mV.
ZOOm? (Query Only)
Returns the current vertical and horizontal positioning and scaling o f the display.
Group
Zoom
Syntax
ZOOm?
Examples
ZOOM? might return :ZOOM:MODE 1;GRATIC ULE:SIZE 80;SPLIT
EIGHTYTWENTY;:ZOOM:ZOOM1: STATE 1;SCALE 400.0000E-12;POSITION
46.8986;FACTOR 50.0000E+3;HORIZONTA L:POSITION 46.8986;SCALE
400.0000E-12
ZOOm{:MODe|:STATE}
Turns Zoom mode on or off. The Zoom mode query returns the current state of
Zoom mode. This command is equivalent to pressing the zoom button located
on the front panel.
Group
Zoom
Syntax
ZOOm{:MODe|:STATE} {ON|OFF|<NR1>}
ZOOm{:MODe|:STATE}
Arguments
ON turns on Zoom mode.
OFF turns off Zoom mode.
<NR1> = 0 turns off Zoom mode; any other value turns on Zoom mode.
Examples
ZOOM:MODE OFF turns off Zoom mode.
ZOOM:MODE? might return :ZOOM:MODE 1 indicating tha
t Zoom mode is
currently turned on.
2-374 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
