Commands Listed in Alphabetical Order
ZOOM:ZOOM1:HO
RIZONTAL:POSITION?
might return
:ZOOM1:HORIZONTAL:POSITIO N 50.0000 indicating that the Zoom1
reference pointer is currently set a t 50% of acquired waveform.
ZOOm:ZOOM1:
HORizontal:SCAle
Sets or returns the zoom horizontal scale for the specified zoom.
Group
Zoom
Syntax
ZOOm:ZOOM1:HORizontal:SCA le <NR3>
ZOOm:ZO
OM1:HORizontal:SCAle?
Arguments
<NR3> is the amount of expansion in the horizontal direction and ranges from
1.0E-3 to 5.0.
Examples
ZOOM:ZOOM1:HORIZONTAL:SCA LE 5 sets the horizontal scale to 5 seconds.
ZOOM:ZOOM2:HORIZONTAL:SCA LE? might return
:ZOOM2:HORIZONTAL:SCALE 1, indicating that the horizontal scale is 1 second.
ZOOm:ZOOM1:POSition
Sets or returns the horizontal position for the s pecified zoom.
Group
Zoom
Syntax
ZOOm:ZOOM1:POSition <NR3>
ZOOm:ZOOM1:POSition?
Arguments
<NR3> is a value from 0 to 100.00 and is the percent of the upper window that is
to the left of screen center, when the zoom factor is 1× or greater.
ZOOm:ZOOM1:SCAle
Sets or returns the zoom horizontal scale for the specified zoom.
Group
Zoom
2-376 MSO2000B, DPO2000B, M SO2000 and DPO2000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
