Tektronix DPO5000 Series User Manual

Display a wavefo
rm
Using a visual search
A visual search is performed with the same settings as the main trigger. The results o f a visual search are displayed as
marks with a color distinct from those of an Analyze search. Do the following steps to set up a visual search.
1. Set up pinpoint triggers. (S ee page 68,
Choosing a trigger type.)
2. Set up a visual trigger. (See page 81,
Triggering using Visual Triggers (Visual
Triggering).)
3. Click Mark All Trigger Events in
Record.
4. Visual Trigger areas are displayed in
blue.
5. Visual Search areas are displayed in
green.
6. Only the active visual search area is
displayed. Press the Mark Next and the
Mark P
rev buttons to mov e the active
area to other visual search areas.
Use the other Analyze Search control
wind
ows to control or view the results of the
Visual S earch.
112 MSO/DPO70000DX, MSO/DP O70000C, DPO7000C, and MSO/DPO5000 Series User Manual

Tektronix DPO5000 Series Specifications

General

Brand	Tektronix
Model	DPO5000 Series
Category	Test Equipment
Language	English