Preface
12.5 GHz bandwidth and 50 GS/s on 4 analog channels and 100 GS /s real time sampling rate on 2 analog channels,
MSO71254C and D
PO71254C
8 GHz bandwidth and 25 GS/s real time sampling rate on 4 analog channels, MSO70804C and DPO70804C
6 GHz bandwidth and 25 GS/s real time sampling rate on 4 analog channels, MSO70604C and DPO70604C
4 GHz bandwidth and 25 GS/s real time sampling rate on 4 analog channels, MSO70404C and DPO70404C
3.5 GHz bandwidth and 10 G S/s real time sampli ng rate on all channels, 40 GS/s on 1 channel, DPO7354C
2.5 GHz bandwidth and 10 G S/s real time sampli ng rate on all channels, 40 GS/s on 1 channel, DPO7254C
1 GHz bandwidth and 5 GS/s (10 GS/s optional) real time sampling rate on all channels, 20 GS/s (40 GS/s optional)
on 1 channel, DPO7104C
500 MHz bandwidth and 5 GS/s real time sampling rate on all channels, 20 G S/s on 1 channel, DPO 7054C
2 GHz bandwidth and 10 GS/s real time sampling rate on 2 analog channels, MSO5204 and DPO5204
1 GHz bandwidth and 10 GS/s real time sampling rate on 2 analog channels, MSO5104 and DPO5104
500 MHz bandwidth and 5 GS/s real time sampling rate on all analog channels, MSO5054 and DPO5054
350 MHz bandwidth and 5 GS/s real time sampling rate on all analog channels, MSO5034 and DPO5034
Enhanced Bandwidth capability that, when enabled, applies Digital Signal Processing (DSP) filters that can extend the
bandwidth and flatten the passband. Enhanced Bandwidth provides a matched response across enabled channels when
they are at maximum sample rate. You can limit the bandwidth down to 500 MHz to optimize the signal to noise ratio.
Enhanced bandwidth is extended to the probe tip for some high performance probes and tips.
Record lengths up to 500,000,000 samples, depending on model and option
Up to 1.0% DC vertical gain accuracy, depending on model
Four analog input channels (each with 8-bit resolution when not in Hi-Res mode), auxiliary trigger input and output
Sixteen digital channels available on MSO70000C/DX and MSO5000 Series instruments w ith an additional clock
channel available on the MSO70000C/DX
iCapture allows analyzing the analog characteristics of the digital channels on MSO70000C/DX S eries instruments
Sample, envelope, peak-detect, high-resolution, waveform database, average, and FastAcq acquisition modes
Full programmability, with an extensive GPI B-command set and a m essage-based interface
PinPoint triggering with flexible A and B trigger events and logic qualified triggers available on MSO70000C/DX,
DPO70000C/DX, and DPO7000C
Complete set of triggers available on MSO5000 and DPO5000 Series instruments
Selectable trigger position c orrection to more accurately place the trigger and reduce jitter
Serial triggering on industry standards, serial pattern triggering, and pattern lock triggering are available on some
models or options.
Trigger on digital channels on MSO70000C/DX and MSO5000 Series instruments
Visual triggering, an intuitive method of triggering based on shapes in the instrument display, optional
Powerful built-in m easurement capability, including histograms, automatic measurements, eye pattern measurements
and measurement statistics
MSO/DPO70000DX, MSO/DPO70000C, DP O7000C, and MS O/DPO5000 Series User Manual xv
To Next Page
Loading...
Need help?
General
