Tektronix MDO3000 Series Program Manual

Command Groups
Table 2-42: Vertical Commands (cont.)
Command Description
REF<x>:HORizontal:SCAle This command specifies the horizontal scale for a reference waveform
REF<x>:LABel
This command specifies the specified reference w aveform label
REF<x>:TIMe? Returns the time that a reference waveform was stored
REF<x>:VERTical:POSition This command specifies the vertical position of the specified reference
waveform
REF<x>:VERTical:SCAle This command specifies the reference waveform vertical scale in vertical
units/div
SELect? Returns information on which waveforms are on or off and which waveform
is selected.
SELect:{BUS<x>|B<x>} Turnsonoroffthespecifi ed bus waveform or returns whether the specified
bus channel is on or off
SELect:CH<x> Turnsonoroffthespecified waveform or returns whether the specified
channel is on or off
SELect:CONTROl This command specifies the waveform that is selected as the implied recipient
of channel-related commands
SELect:DAll This command turns on or off all digital channels (D0 — D15).
SELect:D<x> Turns on the display of digital channel <x> and resets the acquisition
SELect{:MATH|:MATH1} Turns on or off the math waveform or returns whether the math waveform is
on or off
SELect:REF<x> Turnsonoroffthespecified reference waveform or returns whether the
specified reference waveform is on or off
VideoPictureCommandGroup
The video picture features as well as triggering on a video signal are included
standard with the MDO3000 series models. These features require the DPO4VID
application module for use with MSO/DPO4000B and the MDO4000/B/C models.
Use the video picture commands for video picture functionality.
Table 2-43: Video Picture Commands
Command Description
VIDPic:AUTOContrast Sets (or queries) the video picture automatic contrast state.
VIDPic:AUTOContrast:UPDATERate Sets (or queries) the number of frames between automatic contrast updates
VIDPic:BRIGHTNess Sets (or queries) the video picture brightness level as an integer percentage.
VIDPic:CONTRast Sets (or queries) the video picture contrast level as an integer percentage.
VIDPic:DISplay Sets (or queries) the video picture display state.
VIDPic:FRAMETYPe
Sets (or queries) the video picture frame type (ODD, EVEN or INTERLAced).
VIDPic:LOCation:HEIght Sets (or queries) the video picture height, in rows.
2-94 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English