Tektronix MDO3000 Series Program Manual

Command Groups
Table 2-21: Cursor Commands (cont.)
Command
Description
CURSor:XY:POLar:THETA:DELta?
Returns the XY cursor polar coordinate delta
CURSor:XY:POLar:THETA:
POSITION<x>?
Returns the cursor X or cursor Y polar coordinate
CURSor:XY:POLar:THETA:UNIts?
Returns the cursor polar coordinate units
CURSor:XY:PRODUCT:DELta? Returns the difference between the cursors X position and cursor Y position
CURSor:XY:PRODUCT:
POSITION<x>?
Returns the position of the X or Y cursor used to calculate the X × Y cursor measurement
CURSor:XY:PRODUCT:UNIts?
Returns the XY cursor product units
CURSor:XY:RATIO:DELta? Returns the ratio of the difference between the c ursor X position and cursor Y position
CURSor:XY:RATIO:POSITION<x>? Returns the X or Y position for the specified cursor
CURSor:XY:RATIO:UNIts? Returns the X and Y cursor units for the ratio measurement
CURSor:XY:READOUT This command specifies the XY cursor readout selection.
CURSor:XY:RECTangular:X:DELta?
Returns the cursor X delta value in rectangular coordinates
CURSor:XY:RECTangular:X:
POSITION<x>
This command specifies the cursor X rectangular coordinates
CURSor:XY:RECTangular:X:UNIts? Returns the Cursor X rectangular units
CURSor:XY:RECTangular:Y:DELta?
Returns The cursor Y delta value in rectangular coordinates
CURSor:XY:RECTangular:Y:
POSITION<x> >
This command specifies the cursor Y rectangular coordinate
CURSor:XY:RECTangular:Y:UNIts?
Returns the cursor Y rectangular units
Display Command Group
Use the commands in the Display Command Group to change the graticule style,
the display intensities, and to set the characteristics of the waveform display.
NOTE. Your settings globally affect all displayed waveforms.
Table 2-22: Display Commands
Command
Description
DISplay?
Returns current display s ettings
DISplay:CLOCk This command specifies the display of the date/time stamp
DISplay:DIGital:ACTIVity Sets or returns the state of the digital channel monitor display.
DISplay:DIGital:HEIght This command specifies the number of available digital waveform position slots.
DISplay:GRAticule This command specifies the type of g raticule that is displayed
DISplay:INTENSITy?
Returns all display intensity settings
DISplay:INTENSITy:BACKLight This command specifies the backlight intensity for the display
2-24 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English