Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
ACQCOMPLete sp
ecifies to act when acquisition completes.
Examples
ACTONEVENT:EVENTTYPE ACQCO MPLETE specifies to take action when
acquisition
completes.
ACTONEVent:NUMACQs
Sets (or queries) the number of acquisitions to complete for the event type
ACQCOMPLete. The default is 1 acquisition.
To set the event type to
ACQCOMPLete,usetheACTONEVent:EVENTTYPe
command.
Group
Act on Event
Syntax
ACTONEVent:NUMACQs <NR1>
ACT
ONEVent:NUMACQs?
Arguments
Integer which can be set as follows:
Table 2-50:
From To Resolution
1 100 1
100 1000 10
1000 10,000 100
10,000 1,000,000 1000
Examples
ACTONEVENT:NUMACQS 350 specifies to take the specified action when 350
acquisitions have been completed.
ACTONEVent:REPEATCount
Sets or returns the number of events to run.
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:REPEATCount <NR1>
ACTONEVent:REPEATCount?
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-123

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English