To Next Page

To Previous Page

Commands Listed in Alphabetical Order

MASK:COPy:SO

Urce

This command speciﬁes the mask that is to be copied to a user-deﬁned custom

mask. The speciﬁed mask is not copied until after the

MASK:COPy:USER

command is ex

ecuted. Note that in addition to a standard mask,

LIMit, US ER

and NONe can also be speciﬁed.

NOTE. The o nly argument enumerations available for the MDO3000 series

models are

CUSTom | LIMit | NONe | U SER

A series of examples showing how to use mask commands for typical tasks

is included in an appendix. (See page E-1, Mask/Limit Command Sequence

Examples.)

Conditions

This command requires a DPO4LMT application module for 4000 series models,

and an MDO3LMT application module for MDO3000 series models.

Group

Mask

Syntax

MASK:COPy:SOUrce

{DS1|DS1A|DS1C|DS2|DS3|DS4NA|DS4XNA|ST S1Pulse|STS1Eye|STS3

|DS2RATESymmetrical|G703DS3|DS3Rate|E1 Coax

|E1Symmetrical|E2|E3|HST1|HST2|HST3|HS T4|HST5|HST6|NONe|USER

|LIMit}

MASK:COPy:SOUrce?

Related Commands

MASK:CUSTom

MASK:COPy:USER

Arguments

ANSI T1.102:

DS1 –DS11.544Mb/s

DS1A – DS1A 2.048 Mb/s

DS1C – DS1C 3.152 Mb/s

DS2 – DS2 6.312 Mb/s

DS3 –DS344.736Mb/s

DS4NA – DS4NA 139.26 Mb/s

2-368 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Program Manual

Other manuals for Tektronix MDO3000 Series