Commands Listed in Alphabetical Order
Examples
RF:MEASUre:TY
Pe ACPR
sets the RF measurement type to ACPR.
RF:MEASUre:TYPe? might return NONE, the default.
RF:POSition
This command specifies the vertical position for the frequency domain traces. The
vertical position is the location of the Reference Level with respect to thetop
of the graticule, in divisions. The lower limit is –10 divisions. The upper limit
is +10 divisions.
Conditions
MDO3000, MDO4000/B, or MDO4000C model
s with option SA3 or SA6 only.
Group
RF
Syntax
RF:POSition <NR3>
RF:POSition?
Related Commands
RF:UNIts
Arguments
<NR3> is a floating point number.
Examples
RF:POSITION –3 moves the frequen
cy domain baseline indicator down3 graticule
divisions from its default position.
RF:POSITION? might return 3.0
000, indicating the baseline indicator has been
set 3 divisions up from its default position.
RF:PRObe:AUTOZero (No Query Form)
This command executes the attached probe’s AutoZero function, for probes that
support this feature. See your probe documentation for more details.
Conditions
MDO3000, MDO4000/B, or MDO4000C models with option S
A3 or SA6 only.
Group
RF
Syntax
RF:PRObe:AUTOZero EXECute
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-563
To Next Page
Loading...
Need help?
General
