Getting Started
This manual explains the use of commands for remotely controlling your
oscilloscope. With this information, you can write computer programs to
perform func
tions, such as setting the front-panel controls, taking measurements,
performing statistical calculations, and exporting data for use in other programs.
Familiarit
y with the User Manual for your oscilloscope is assumed. You can
download the User Manual from the Tektronix website at www.tektronix.com.
NOTE. Most examples in this document assume that both HEADer|:HDR and
VERBose are set to ON.
New in the Programmer
Manual
The follo
wing major changes were made to this version of the programmer
manual (077-0510-07):
Added MD
O4000C series models:
Model Analog
Channels
Analog
Bandwidth
Spectrum A nalyzer
Channe
l
Digital
Channels
AFG
Channe
ls
Maximum
Record Length
Aux Input
connector
MDO4024C
4 200 MHz
MDO4034C
4 350 MH
z
MDO4
054C
4 500 MHz
16 Optional
2.5 GS
/s max
MDO4104
4
1GHz
Option SA3
1at9k
Hz – 3 GHz
Option SA6
1at9kHz–6GHz
16 Optional
2.5
GS/s – 5
GS/s
1 Optional
50 MHz
max.
20 M samples
on all channels
Available on
models without
optio
n SA3 or
SA6.
The Spectrum
Analy
zer
channel
replaces
the A
ux In
connector on
Instruments
with
option SA3
or SA6.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 1-1
To Next Page
Loading...
Need help?
General
