Commands Listed in Alphabetical Order
Arguments
QString is a quo
ted string that specifies which network drive to un-mount.
Examples
FILES:UNMOUNT:DRIVE "I:" specifies to un-mount network drive I:.
FILESystem:WRITEFile (No Query Form)
Writes the specified block data to a file in the oscilloscope current working
directory. If the specified file does not exist or is not readable, an appropriate
error event is posted.
Group
File System
Syntax
FILESystem:WRITEFile <file path>, <data>
Related Commands
FILESystem:CWD
Arguments
<file p ath> is the quoted string that defines the file name and path. If the path
is within the current working directory, specify the file name only.
<data> can be either DEFINITE LENGTH encoding or INDEFINITE LENGTH
ARBITRARY BLOCK PROGRAM DATA encoding as described in IEEE488.2.
FPAnel:HOLD (No Query Form)
This command is used to emulate the button push-and-hold feature. Presently,
only the Cursors button is supported by this command, even though any of the
button enumerations described for
FPAnel:PREss are accepted. (When the
Cursors button on the front panel is held, the cursor menu is displayed on screen.)
This command contains two arguments: a button, and an optional hold time.
Group
Miscellaneous
Syntax
FPAnel:HOLD CURsor [,<NR1>]
Related Commands
FPAnel:PRESS, FPAnel:TURN
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-327
To Next Page
Loading...
Need help?
General
