Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
GPIBUsb:ADDr
ess? (Q uery Only)
Returns the current GPIB address setting for a connected TEK-USB-488 adaptor
module.
Group
Miscellaneous
Syntax
GPIBUsb:ADDress?
GPIBUsb:ID? (Query Only)
Returns the identification string of the connected TEK-USB-488 adaptor module
and firmware version. If a TEK-USB-488.2 module is not connected, the system
returns “Not detected”.
Group
Miscellaneous
Syntax
GPIBUsb:ID?
HARDCopy (No Query Form)
Sends a hard copy of the screen display to the currently active printer usingthe
current palette and layout settings.
Group
Hard Copy
Syntax
HARDCopy {STARt}
Related Commands
*WAI, *CLS
Arguments
STARt sends a block of data representing the current screen image to
the requested port. The data sent is in the image format specified by the
SAVe:IMAGe:FILEFormat command and the compression level is controlled
by the selected format (BMP and TIFF are uncompressed whereas PNG is
compressed). The HARDCopy:INKSaver determines whether the data sent is
in InkSaver mode.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-331

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English