Tektronix MDO4000B Series User Manual

Commands Listed in Alphabetical Order
Returns
Integer, repre
senting the number of hits in the mask segment.
Examples
MASK:COUNT:SEG1:HITS? might return MASK:COUNT:SEG1:HITS 0, showing
that there have been no hits to mask segment 1.
MASK:COUNt:TESTS? (Query Only)
This query returns the number of pass/fail mask tests that have occurred.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 ser
ies models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:COUNt:TESTS?
Related Commands
MASK:COUNt:HITS?
MASK:COUNt
Returns
Integer that represents how many mask tests have occurred.
Examples
MASK:COUNT:TESTS? might return 50, showing that 50 mask tests have occurred.
MASK:COUNt:VIOLATIONS? (Query Only)
This query returns the number of test violations that have occurred in the current
mask pass/fail test. A test violation occurs when any part of a waveform falls
within any mask segment. The default is 0.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-373

Tektronix MDO4000B Series Specifications

General

Brand	Tektronix
Model	MDO4000B Series
Category	Test Equipment
Language	English