Commands Listed in Alphabetical Order
Related Commands
MEASUrement:S
TATIstics:MODe
Arguments
<NR1> is the number of samples used for the mean and standard deviation
statistical accumulations.
Examples
MEASUREMENT:STATISTICS:WEIGHTING 4 sets statistical weighting to four
samples.
MEASUREMENT:STATISTICS:WEIGHTING? might return
:MEASUREMENT:STATISTICS:WEIGHTING 4 indicating that
measurement statistics weightingiscurrentlysetto4samples.
MESSage
This command sets or queries message box (screen annotation) parameters.
Group
Display
Syntax
MESSage
MESSage?
Examples
MESSAGE? might return MESSAGE:SHOW "TP401";BOX
271,82,292,114;STATE 0
indicating the message parameters.
MESSage:BOX
This command specifies the co-ordinates of the message box. This command doe
s
not display the message unless MESSage:STATE is on.
X1 and Y1 are the screen coordinates of the top left corner of the message bo
x.
X2 and Y2 are the screen coordinates of the bottom right corner of the message
box. All four coordinates are returned by the query.
Changing the text in the message box, using the MESSAGE:SHOW command,
automatically resizes the message box. If you want a custom message box
size, send the MESSAGE:BOX command after changing the text using the
MESSAGE:SHOW command.
Message box settings and data are saved and restored in saved setups.
Group
Display
2-452 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
